This is the UK first anti-scald basin mixer that enables the setting of a max temperature stop without the aid of a TMV mixing valve.  This unit provides unrivalled safety whilst at the same time negating the significant maintenance requirements associated with current TMV valves.
 
WMS-mixers with possibilities of wireless connection (subscription is required)
Adjustable hygiene flushing, intervals and rinsing time (to avoid stagnant water)
Logging of all flushings with point of time, water consumption and temperature for individual mixer or group of mixers (minimum, maximum and average values)
Battery monitoring
Built-in temperature measurements of mixed water temperature
Programmable temperature stop, the mixer will turn off directly at set maximum temperature
With mixing valve (but also provides cold drinking water as well as hot water only) 
Soft closing solenoid valve 
Safe against vandalism, complete in metal 
Eco (energy and water saving constant flow aerator, 5 l/min at 200–600 kPa) 
With fixed spout
The mixer is activated by holding a hand in front of the sensor eye. Once started the mixer will run for at least 6 seconds and will continue to run as long as the hand is in front of the sensor.
Flush Timeout - safety shut-off to prevent flooding, maximum of 60 seconds 
60 sec. rinse time via sensor 
Can be turned off by solenoid valve (eg for cleaning) 
Low power consumption - Long life 
Equipped with system for thermal disinfection against legionella 
Battery operation, can be converted to mains operation 
IP class sensor, IP67 
Approved non-return valves, EN-Standard EN1717

Installation:
Note! Gateway and a subscription is required for WMS 
Automatic sensor calibration
Easy to change battery, without turning off the water supply
Mains operation requires installation of the AC adapter FMM 1623-0000, and power supply FMM 1619-4000 alternatively transformer FMM 1619-3000

Settings:
Adjustable max temperature 
With Gateway and WMS:
- Hygiene flushing with adjustable time and intervals
- Initiate hot water rinsing
- Programming of rinsing times, temperature alarm och temperature stops
- Alert signal if exceeding the time limit for stagnant water (the latest flushing)