WMS-mixers with possibilities of wireless connection (subscription is required)

Adjustable hygiene flushing, intervals and rinsing time (to avoid stagnant water)

Logging of all flushings with point of time, water consumption and temperature for individual mixer or group of mixers (minimum, maximum and average values)

Battery monitoring

Built-in temperature measurements of mixed water temperature

Programmable temperature stop, the mixer will turn off directly at set maximum temperature

With mixing valve (but also provides cold drinking water as well as hot water only) 

Soft closing solenoid valve 

Safe against vandalism, complete in metal 

Eco (energy and water saving constant flow aerator, 5 l/min at 200–600 kPa) 

With fixed spout

The mixer is activated by holding a hand in front of the sensor eye. Once started the mixer will run for at least 6 seconds and will continue to run as long as the hand is in front of the sensor.

Flush Timeout - safety shut-off to prevent flooding, maximum of 60 seconds 

60 sec. rinse time via sensor 

Can be turned off by solenoid valve (eg for cleaning) 

Low power consumption - Long life 

Equipped with system for thermal disinfection against legionella 

Battery operation, can be converted to mains operation 

IP class sensor, IP67 

Approved non-return valves, EN-Standard EN1717 Installation:

Note! Gateway and a subscription is required for WMS 

Automatic sensor calibration

Easy to change battery, without turning off the water supply

Mains operation requires installation of the AC adapter 1623-0000, and power supply FMM 1619-4000 alternatively transformator FMM 1619-3000 Settings:

Adjustable max temperature 

With Gateway and WMS: - Hygiene flushing with adjustable time and intervals - Initiate hot water rinsing - Programming of rinsing times, temperature alarm och temperature stops - Alert signal if exceeding the time limit for stagnant water (the latest flushing)